STOCK No.56-471 25KG
Water-based Fuel Oil Remover is used as the heavy fuel oil remover (such as ship fuel oil) on metal surface including carbon steel and stainless steel. L50 is Suitable for cleaning of ship oil separator, fuel heating system, boiler fuel, whole ship fuel system, fuel tank, etc.
● Being good alternative of gasoline, kerosene and other solvents
● Safety of use, especially safe for the health of operators
● Easy to handle, suitable for soaking, scrubbing, etc.
● Removing oil mainly by stripping
● Easy to recycle the stripped oil, and greatly reducing the impact on the environment
特别说明:禁止与其他清洗剂混合使用。浸泡（含刷洗）时，第一次的 漂洗液不宜直接用水，应该用该产品的稀溶液（如1:10），否则易引 起油垢的再沉积！
1. Concentration: either soaking with stock solution or spraying with 10% product in water, or adjusting depending on the amount of oil.
2. Temperature: room temperature or heating. Heating can accelerate the removal of oil.
3. Time: Depending on the cleaning method.
4. Methods: Ultrasound, brushing, soaking, etc. If spraying or other strong mechanical force is adopted, defoamer needs to be added together.
Special notes: It is forbidden to mix with other detergents. When soaking (including scrubbing), the diluted solution of the product (e.g. 1:10) should be used as the first rinse solution instead of water alone; otherwise it will easily cause the redeposition of oil scale.
1.Wearing rubber gloves and protective glasses while Operating. 2.INTERNAL: Immediately while take it in, and drinking a lot of mill or water. 3.EYES: Washing eyes Immediately with a lot of water about 15min while it is in eyes. If seriously must see a doctor. 4.SKIN: Immediately with a lot of water while contact to. If seriously must see a doctor. 5.LEAKAGE：Use of absorbent material.
存储运输: 避光、避热、避压、撞击。STORAGE: Keep the vessel closed, avoid light and heat.